Announcement

Collapse
No announcement yet.

Q@#^&&*(#& Drain Plugs

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Q@#^&&*(#& Drain Plugs

    Anyone with a 98 EVO tell me where the damn drain plug is for the crank case and tranny???? Holy crap!!!!!!!!!!:mad::mad::mad:

  • #2
    What model?

    Usually the engine oil is in left front corner of the oil pan. Bottom right hand side is transmission. Hope this helps....

    Comment


    • #3
      I'm going to put it up on the lift tomorrow and poke around.. Going from Twin Cam 88's to an EVO is a little shocking... Thanks buddy I'll check it out...

      Comment


      • #4
        If its like TCs there will be a plug you don't want to crack.
        Fortes fortuna adiuva
        Helmets are like rubbers, you know you should wear one, but its so much better when you don't-Me.

        Comment


        • #5
          There's a manual for a 98 Dyna in our download section.... that should have the info you need.
          Ride safe, Stoney


          sigpic

          03glide

          Comment


          • #6
            Cool thanks Stoney

            Comment


            • #7
              motor drain will be on the oil tank , tranny willy be under it , primary is at the rear of the primary.. EVO's dont hold oil , tank does.. download stoneys manual..if you have a touring model, you havent said, the tranny drains through the oiltank, in the middle..

              Comment


              • #8
                cone motor is in my opinion the most user friendly... your lucky you got one..

                Comment


                • #9
                  Originally posted by Berserker View Post
                  If its like TCs there will be a plug you don't want to crack.
                  Ya, what is that plug for?

                  Comment


                  • #10
                    my 96 evo is parked outside you want me to take a picture?

                    Comment


                    • #11
                      I got it figured out... Thanks guys for the help...

                      Comment

                      Working...
                      X